Specification Sheet

K E Y I N G S Y S T E M S
K E Y W AY S A N D C O N S T R U C T I O N K E Y I N G
8
Keyways
“G” keyway is standard for all Falcon conventional (non-I/C)
cylinders and will be supplied unless otherwise specied.
The multiple keyway structure shown to the right is used to
expand keying systems which require more than one keyway.
Falcon bored locksets are also available with the most common
competitors’ keyways shown below. Falcon does not offer
master keying of their keyways. D Series deadlocks are limited
to “D1”, “L4”, “C”, “E” and “GA” keyways.
N P
R
LK
J
HG
F
E
Falcon Multiplex Key Family
All section keys.
Multi-section keys.
Keyways and single
section keys.
“E” keyway is entered
by all Falcon keys.
“E” keyway is normally
used to extend Weiser
key systems only.
Corbin
Russwin
Sargent
LA
Schlage
C E
Yale
E1R
8 PAR
A
60 D1 L4
Keyways
Construction Master Keying
Construction master keying is an option for conventional (non-
I/C) cylinders and locksets. Cylinders are prepared with a special
construction pin at the factory so that the construction master
key (CMK) operates all cylinders while the building is under
construction.
When construction is complete, turn the top master key in each
cylinder. This process moves the special construction pin into
a pocket of the cylinder plug, thereby eliminating subsequent
operation of the CMK.
To order, specify “(CMK)” after the line item.
Example: 72 each D441 626 1AA - 72AA (CMK)
Blockokey® System
Falcon’s Blockokey® System is used for extensive master key
systems using conventional (non-I/C) cylinders and locksets.
Locks are shipped from the factory with a plastic “key block” in
the back of every cylinder’s keyway. A shorter 4-pin “Project Key”
operates all cylinders while the building is under construction.
When construction is complete, use the special KB536 extractor
key (removal tool) to remove the key block from each cylinder,
thereby voiding operation of the Project Key.
To order, specify “Blockokey” after the line item.
Example: 72 each D441 626 1AA - 72AA Blockokey
Orders must include the name and address of the person to whom the construction keys and permanent master and
change keys should be sent.
SKD Security Caution
Unless otherwise specied, SKD sets will not be construction master keyed. Doing so signicantly limits the system’s expansion and
decreases the security of the SKD locks.
When construction master keying is required for SKD sets, Falcon recommends issuing the SKDs on a different keyway with their own
(separate) CMK. All orders which include SKD sets should specify how the construction keying should be handled.