User's Manual
Table Of Contents
- U111287 cover - Falcon
- U111287-02 CLASSIC PROFESSIONAL+ KITCHENER 90 DUAL FUEL [AUS]
- 1. Before You Start...
- 2. Cooker Overview
- 3. Rotary clock
- 4. 3 button clock
- 5. 6 Button clock
- 6. Cooking tips
- 7. Cooking Table
- 8. Cleaning your cooker
- 9. Troubleshooting
- 10. Service and Spares
- 11. Installation
- Safety Requirements and Regulations
- Provision of Ventilation
- Location of Cooker
- Conversion
- Positioning the Cooker
- Moving the Cooker
- Lowering the Two Rear Rollers
- Completing the Move
- Levelling
- Fitting the Stability Bracket and Chain
- Fitting a Stability Bracket
- Fitting the Restraining Chain
- Gas Connection
- Natural Gas
- Propane
- Pressure Testing
- Electrical Connection
- Fixed Wiring
- Final Fitting and Checks
- Customer Care
- 12. Conversion to LP Gas
- 13. Servicing
- 14. Circuit Diagram
- 15. Technical Data
13
1
12
1
1
Check how much time you have left
Beeper tone adjustment
1
12
1
1
B
1
1
1
12
To start and stop the oven automatically (main oven only)
The timer allows you to automatically start and stop by a combination of the length of the cooking time and the stop time.
Giving you the exibility to cook casseroles etc while you are out. You cannot set the actual start time.
Step. 1
1. The display will show the current time of day
plus the ‘cook time’ you just set.
2. Turn knob (2) to set the time of day you want
the oven to stop cooking
Current time will be displayed along with the
word ‘AUTO’. Set the oven to the required cooking
temperature and function.
Set the cook time
Alarm will sound when cooking has nished, to
cancel follow this step
In this example the oven will come on automatically at
16.00 and switch o at 17.00.
Note: The cook symbol [
] will be visible once in operation.
Step. 2
Step. 3
Step. 4.
Note: Whilst this
operation cancels all
automatic program
settings, it does not cancel
the minute minder.
Adjust the
beeper tone
using this knob.
Step. 1
Step. 2
n
REMEMBER Turn the oven control knob(s) to 0.
Switch between these two.
To cancel any automatic settings