User's Manual

INSTALLATION
Check the appliance is electrically safe and gas sound when you have nished.
35
ArtNo.350-0010 - Fitting the plinth 1 (Kitchener)
ArtNo.215-0026 - Handle gaskets fixed
Art No 215-0028 - Handrail fascia fixings
Fig. 11.18
Fig. 11.19
Fig. 11.20
Fitting the Handles and Handrail
Remove the 4 mm Allen screws from the doors (Fig. 11.18).
Fit the door handles and secure using the 4 mm screws.
n
The handles should be above the xings.
Remove the 4 mm Allen screws from the top corners of the
fascia (Fig. 11.19). Fit the handrail in position and secure
using the 4 mm screws.
Fitting the 1-piece Plinth (Professional +)
Loosen the 3 screws along the front bottom edge of the
cooker. Hook the central keyhole over the central screw. Twist
and t each end keyhole over their respective screws. Tighten
the xing screws (Fig. 11.20).
Fitting the 2-piece Plinth (Classic & Kitchener)
Fit the inner plinth to the bottom front of the cooker using
the 4 screws provided (Fig. 11.21).
Fit the outer plinth (2 screws, 1 each end) to the inner plinth.
The height of the outer plinth can be adjusted by sliding it up
or down via the slotted hole (Fig. 11.22).
Fitting the Splashback
Position the splashback on the rear of the hotplate and secure
with the screws supplied.
Customer Care
Installer: Please complete your details in this Guide, inform
the user how to operate the cooker and hand oven the
instructions.
Thank you.
ArtNo.350-0011 - Fitting the plinth 2 (Kitchener)
Outer plinth
Outer plinth xing screw
Inner plinth
Fig. 11.21
Fig. 11.22