MA Series Specification

MA Series
Conversion Chart
For correct ordering, and to ensure no delays in shipment of your
order, the following descriptive data must be listed in the sequence
shown. Necessary information can be found in other parts of this
catalog.The example below shows an order for 16 each MA locksets
in the 521 Entry function, DG (Dane-Gala) trim design in a 626
(satin chrome) finish, 8 RH (right hand) and 8 LH (left hand) to
accommodate doors 1-3/4” thick with AA1-AA16 keying.
Quantity: Indicate the quantity required.
Catalog Number: Select catalog number.
Trim Design: Indicate letter of knob or lever design followed by
letter of rose or escutcheon design.
Example: DG-D for Dane lever followed by G for Gala rose.
Finish: When the finish is the same for the outside and inside trim,
it is shown once (626). For split finishes, the outside is designated
first, then the inside (626 x 625).
Latch: Two-piece mechanical anti-friction standard. All catalog
numbers shown in this catalog indicate 2-3/4” backset.
Strike: 4-7/8” x 1-1/4” x 1-5/16” lip-to-center with curved lip
standard. Optional strikes with shorter or longer lip lengths available.
Cylinder Type: For 6-pin, add 6-pin. For 7-pin, add 7-pin.
Door Hand: See chart .
Keying Detail: We suggest using the standard terms developed by
the A.H.C. (Consult Factory).
Example: AA1 - Grand Master keyed, Master keyed, change key 1.
Interchangeable Core: To order product capable of accepting an
interchangeable core, add “B” less SFIC ( for interchangeable core).
To order product with an interchangeable core, add “SFIC” (with
interchangeable core). ex: “G” with Falcon SFIC core.
Keyway: “G” is standard on regular cylinders, “A” is standard on
interchangeable cores. Other keyways available. See price book.
Additional Keys: Note the total number of keys required.
Large Bow Keys: Add - “with large bow keys.”
How to Order
How to Order Example
Qty.
Catalog
Number
Trim
Design
Finish Latch Strike Cylinder RH LH RHR LHR Detail
8 MA521P DG 626 STD STD 6-PIN X AA1-AA8 1-3/4” DR
8 MA521P DG 626 STD STD 6-PIN X AA9-AA16 1-3/4” DR
MA Series
Interchangeable Core Cylinders
Door Hand
17
Finishes
Falcon offers several finish choices to compliment the design
elements of most any project. Falcon applies the best available
protective plating or coating to the surface of our products
to minimize the exposure to weather, pollution, perspiration,
extremes of climate, frequency of us and other factors. Please
consult with us if your building is subjected to chemical or
corrosive conditions, as some finishes would not be recommended
for these areas. Falcon recommends chrome plated or stainless
steel finishes for high corrosive environments.
Trim Finishes Chart
Available Finishes
Description ANSI No. Available on
Bright Brass 605 All Trim
Satin Brass 606 All Trim
Satin Bronze Oil
Rubbed
613 All Trim
Bright Chrome 625 All Trim
Satin Chrome 626 All Trim
Satin Stainless Steel 630 All Trim
How to Determine the Hand of a Door
605
Bright Brass
606
Satin Brass
613
Oil Rubbed
Bronze
625
Bright Chrome
626
Satin Chrome
630
Satin Stainless
Steel