User's Manual
Table Of Contents
- U111318 - cover
- U111318-01 NEXUS STEAM OVEN 110 DUAL FUEL [AUS]
- 1. Before You Start...
- 2. Range Overview
- 3. Using the Glide-out Grill™
- 4. The Multifunction Oven
- 5. The Steam Cavity
- 6. Cleaning Your Cooker
- 7. Troubleshooting
- 8. Service and Spares
- 9. Installation
- Safety Requirements and Regulations
- Provision of Ventilation
- Location of Cooker
- Conversion
- Positioning the Cooker
- Moving the Cooker
- Lowering the Two Rear Rollers
- Completing the Move
- Levelling
- Repositioning the Cooker Following Connection
- Gas Connection
- Natural Gas
- Propane
- Pressure Testing
- Electrical Connection
- Connection in New Zealand
- Fixed Wiring
- Final Fittings and Checks
- Customer Care
- 10. Conversion to LP Gas
- 11. Servicing
- 12. Circuit Diagram
- 13. Technical Data
24
Fig. 5.14
Fig. 5.15
Fig. 5.16
The Clock / Timer
The clock above the multi-function oven must be set to
the time of day before the multi-function oven or steam
cavity will work.
See "Setting the clock" on page 17.
Note: The steam cavity control does not show the time of
day. This is automatically set from the multi-function oven
control.
The display will remain blank until the steam cavity is turned
on.
To stop the steam cavity at a specific time of day
1. Switch the cavity on and set the temperature (see
'Operating the Steam Cavity' on page 22).
2. Tap the timer button to set the 'cook period' hours using
the [+] or [-] buttons. Tap the timer button again to set
the minutes using the [+] or [-] buttons (Fig. 5.14).
3. Tap the Start / Pause button.
To start and then stop the steam cavity
Set the steam cavity to automatically start and stop using a
combination of the ‘cook period’ and ‘stop time’.
You cannot set a start time directly – this is set automatically
by a combination of the ‘cook period’ and ‘stop time’.
1. Switch the oven on and set the temperature (see
'Operating the Steam Cavity' on page 22).
2. Tap the ‘timer’ button, the cook period symbol [ ] is
displayed. Set the hours using the [+] or [-] buttons. Tap
the timer button again to set the minutes using the [+]
or [-] buttons.
3. Tap the ‘timer’ button to select the ‘stop time’ [ ]. Set
the time you would like to stop cooking using the [+]
or [-] buttons. Tap the ‘timer’ button again to set the
minutes using the [+] or [-] buttons.
4. Tap the Start / Pause button. The display will show the
'cook period' (Fig. 5.15) and the 'stop time' (Fig. 5.16).
5. When the ‘stop time’ is reached an alarm will sound and
the oven will stop cooking. ‘End’ will show in the display.
Tap the 'temperature' button during the cooking cycle to
display the current oven temperature.