User's Manual
Table Of Contents
- 1. Before You Start...
- 2. Cooker Overview
- 3. Using the Glide-out Grill™
- 4. 3 Button clock
- 5. Cooking tips
- 6. Cooking Table
- 7. Cleaning your cooker
- 8. Troubleshooting
- 9. Service and Spares
- Safety Requirements and Regulations
- Provision of Ventilation
- Location of Cooker
- Positioning the Cooker
- Moving the Cooker
- Fitting the Stability Bracket
- Repositioning the Cooker Following Connection
- Levelling the Cooker
- Electrical Connection
- Connection in New Zealand
- Fixed Wiring
- Final Checks
- Final Fitting
- Customer Care
- 10. Servicing
- 11. Circuit Diagrams
- 12. Technical Data
16
ArtNo.320-0017
Main oven light
Operating the Ovens
Multifunction Ovens
The multifunction oven has two controls: a function selector
and a temperature setting knob (Fig. 2.17).
Turn the function selector control to a cooking function. Turn
the oven temperature knob to the temperature required (Fig.
2.18).
The oven heating light will glow until the oven has reached
the temperature you selected. It will then cycle on and o
during cooking.
When cooking foods with high water content, there may be
some steam visible at the grille at the rear of the hotplate.
This is perfectly normal.
Fan Ovens
Turn the oven knob to the desired temperature (Fig. 2.18).
The oven indicator light will glow until the oven has reached
the temperature selected. It will then cycle on and o during
cooking.
Main Oven Light
Press the button to turn the light on (Fig. 2.19).
If the oven light fails, turn o the power supply before
changing the bulb. See the ‘Troubleshooting’ section for
details on how to change the bulb.
Accessories
Glide-out Shelf - Left-hand (Main) Oven
The oven shelves (Fig. 2.20) are retained when pulled
forward but can be easily removed and retted.
The left-hand oven is supplied with glide-out oven shelves.
To t the glide-out shelves, hook the front of the shelf onto
the runners as shown (Fig. 2.21). The rear of the shelf should
rest on the runners, in front of the rear stop (Fig. 2.21).
The glide-out shelves and runners can be easily removed or
repositioned.
To remove the glide-out shelves
Raise the rear of the shelf, so that it clears the rear stops. Then
unhook from the front locating bracket.
ArtNo.270-0006 Proplus
oven control light
Function control Temperature control
Fig. 2.17
Fig. 2.18
Fig. 2.19
Fig. 2.20
Shelf guard
Front