Technical Specifications

Knife

SKU: 125-1849

Thickness:

1/2” nominal thickness, Plus 0” - minus

3/64” to ANSI and HPVA standards.

Face Veneer:

HPVA “C” Grade, 1/36” thick, Rotary Cut

Natural Maple, Preﬁnished

Back Veneer:

HPVA #2 Grade, 1/36” thick, Rotary Cut,

Natural Maple, Preﬁnished

Panel Construction:

3-Ply Veneer Core, Maple Face, Maple

Back, 5-ply total.

Glue:

Carb 2 Certiﬁed

Ultra Low Emitting (ULEF)

Unit Packaging:

Cardboard cover, three plastic bands,

30 pieces. Can be purchased individually.

3rd Party Certiﬁcation:

SFI - Sustainable Forestry Initiative

ANSI/HPVA - American National

Standards Institute/Hardwood Plywood

Veneer Association

Updated July, 2012

Made

in the USA

1/2” - 4’x8’ C2 Grade

Preﬁnished Natural Maple

Rotary Cut, Veneer Core

Hardwood Plywood

Rotary C

ut - The entire log is cut or “peeled.” Can yield fu

ll sheets

of veneer. Grain

pat

tern i

s broad with no plain or quarter slice

d appearance.

See Other Side for Back

*Typical Face

*Appearance will vary.

PAGE 1
/2” - 4’x8’ C2 Grade Preﬁnished Natural Maple Rotary Cut, Veneer Core Hardwood Plywood Made in the USA *Typical Face SKU: 125-1849 Thickness: 1/2” nominal thickness, Plus 0” - minus 3/64” to ANSI and HPVA standards. Face Veneer: HPVA “C” Grade, 1/36” thick, Rotary Cut Natural Maple, Preﬁnished Back Veneer: HPVA #2 Grade, 1/36” thick, Rotary Cut, Natural Maple, Preﬁnished Panel Construction: 3-Ply Veneer Core, Maple Face, Maple Back, 5-ply total.
PAGE 2
1/2” - 4’x8’ C2 Grade Preﬁnished Natural Maple Rotary Cut, Veneer Core Hardwood Plywood Made in the USA *Typical Back Core SKU: 125-1849 ANSI/HPVA National Standard for #2 Backs Grade Descrip on Sapwood/Heartwood Discolora on Mineral Streaks Sound Tight Burls Maximum Number of Tight Knots Maximum Combined Number of Knotholes and Repaired Knots Wormholes Splits or Open Joints Rough cut/ruptured grain Bark Pockets Laps 2 Yes Yes Yes Yes 16 All repaired; unlimited to 3/8 inch; No more than 8 from 3/8 in