Technical Specifications

Knife
SKU: 125-1696
Thickness:
3/4” nominal thickness, Plus 0” - minus
3/64” to ANSI and HPVA standards.
Face Veneer:
HPVA “B” Grade, 1/36” thick, Rotary Cut
Natural Birch, 16 component maximum,
Sandable
Back Veneer:
HPVA #2 Grade, 1/36” thick, Rotary Cut,
Natural Birch, Sandable
Panel Construction: 7-Ply Veneer Core,
Birch Face, Birch Back, 7-ply total.
Glue:
Carb 2 Certified
Ultra Low Emitting (ULEF)
Unit Packaging:
Cardboard cover, three plastic bands,
20 pieces. Can be purchased individually.
3rd Party Certification:
SFI - Sustainable Forestry Initiative
ANSI/HPVA - American National
Standards Institute/Hardwood Plywood
Veneer Association
Updated March, 2012
Made in t
he USA
3/4” - 4’x8’ B2 Grade
Natural Birch
Rotary Cut, Veneer Core
Hardwood Plywood
Rotary C
ut - The entire log is cut or “peeled.” Can yield full sheets
of veneer. Grain
pat
tern is broad with no plain or quarter sliced appearance.
See Other Side for Back
*Typical Face
*Appearance will vary.