Operation Manual

Navigation settings
User Manual Falk Navigator
- 38 -
3.4.1 Vehicle
First select the Vehicle by tapping on the first row
at the top. You can now choose between car,
motorcycle, bicycle and pedestrian.
Furthermore, you can set a maximum speed for
each vehicle type, including pedestrians. Confirm
your selection with OK.
3.4.2 Camper vehicles (depending on model)
When a Camper vehicle is selected, you have access to additional functions. You can
specify or select dimensions, weight, trailer or truck mode for larger mobile homes.
Once the appropriate profile is set, a route is calculated on the basis of these settings. See
also the chapter about mobile home functions on page 32.
Start by selecting Camper as the vehicle type.
Next, select the vehicle data on the right-hand
side of the screen. You can then adapt the data to
your vehicle.
Apart from the minimum speed, you can specify
the permissible total weight along with the length,
width, and height of your vehicle. If you select
Lorry, roads which cannot be used by trucks will
be avoided. Current legislation in Germany, for
example, categorizes mobile homes weighing 3.5 t and above as trucks. Legislation in other
countries differs. If you select Trailer, roads which must not be used by vehicles towing
trailers will be avoided.
Danger of accident!
The information in the map material could be incorrect due to sudden changes (e.g. road
works)! Moreover, information is not available for all roads and all countries. The traffic
situation and local signposts have priority over the information given by the navigation
system.