Operation Manual

System settings
User Manual Falk Navigator
- 44 -
4.5 Home
Using the option Home, you can change your
home address that you entered at the initial start.
You can either enter your home address
completely anew or retrieve it from other sources
(Last destinations, My favourites, Points of
interest etc.).
4.6 Language
Press Language to display the texts in the touch screen in the desired language. Confirm
your selection by pressing OK.
4.7 Keyboard Layout
You can switch the sequence of the keyboard layout by selecting the corresponding key in
the menu item Keyboard Layout.
4.8 Tones
You can switch the signal tones of the navigation device on/off by pressing the Tones button.
This also includes the clicking of the screen buttons.
4.9 Factory reset
You can reset your navigation device to the
factory setting. If you confirm with "yes", the
following changed data will be deleted: saved
destinations, saved routes, the home address and
telephone data.
4.10 Information
Under the menu item Information you can find
data relating to the software and navigation device, such as the serial number.
4.11 Calibration (model dependent)
If the touch screen does not respond correctly when you press on the buttons, you will have
to calibrate the screen. To do this, press on the Calibration button. The calibration
procedure will start. You are guided through the procedure by means of text instructions.