Specification Sheet

10/21/2015
PRODUCTSPECIFICATIONS
ComforTech4‐DFullBodyHarness #7081SFD
Features
Material Specifications
Webbing: Polyester;Min.5,000lbs.tensilestrength
D‐Rings:
A
lloySteel;Min.5,000lbs.tensilestrength
Buckles/Adjusters:
A
lloySteel;Min.3,375lbs.tensilestrength
Performance Specifications
TensileStrength: Min.5,000lbs.
Max.Capacity: 425lbs.
TomaintainANSIZ359compliance,limit
totaluserweightto310lbs
Relevant Standards
OSHA: CFR1926.502,CFR1910.66
ANSI:
A
10.32‐2004,Z359.1‐2007,Z359.12‐2009
W
arnings
∙Read,understandandfollowalllabelsand
instructionspriortouse.
∙Inspectbeforeeachuse.
∙Removefromserviceifthereisevidenceof
damageorexcessivewear.
∙NeverattachaShockAbsorbingLanyardto
thefront
,sideorshoulderD‐Rings.
UNDERSTOODPRIORTOUSE.FAILURETOREADANDFOLLOWALLPRODUCTWARNINGSANDINSTRUCTIONSCOULDRESULTINSERIOUSINJURYORDEATH
.
∙4D‐rings,Back,SideandFront
∙5‐pointadjustability
∙9‐position,heavy‐dutytonguebucklelegstraps
∙Paddedshoulderyoke
∙2lanyardkeepers
FallTech1306S.AlamedaSt.Compton,CA90221Tele:323‐752‐0066www.falltech.com
∙Waistpad/positioningassemblywithlumbarsupport
∙Extremeduty,removableworkbelt
WARNING:THISSPECIFICATIONSHEETPROVIDESANOVERVIEWOFPRODUCTSAVAILABLEFROMFALLTECH.CAREHASBEENTAKENTOASSURETHEACCURACYO
F
THEINFORMATION.ITDOESNOTPROVIDEIMPORTANTPRODUCTWARNINGSANDINSTRUCTIONS.FALLTECHRECOMMENDSALLUSERSOFFALLPROTECTION
EQUIPMENTUNDERGOTHOROUGHTRAINING,ANDTHATALLWARNINGSANDINSTRUCTIONSPROVIDEDWITHTHESEPRODUCTSBETHOROUGHLYREAD
∙Size:Small