User Manual

E.ION



Today Falmec offers a new technology applied to its hoods which allows atmospheric

ions to be recreated – through BIPOLAR CONTROLLED IONISATION technology*,

ions which not only decrease unpleasant odours, but also re-establish optimum ionic

balance in the living environment, with significant benefit to human wellness and

health. The action produced by the ions is one that neutralises all the polluting agents

in the air such as bacteria, viruses, dust mites, pollen, spores, various dusts, foul

odours, cigarette smoke, exhaust fumes and purifies, sanitises and optimises it.

The sensor in the E.ion® products detects the presence of volatile organic

composites (VOC), odorous gases, formaldehyde, cigarette smoke, ammonia and

all polluting agents that are in the air. This is therefore an excellent indicator to

measure the variation of domestic air quality. This information is translated into the

leaf colour which gradually turns from yellow to green as the conditions improve.

We implemented yet another feature which optimizes the potential of the ionization.

Thanks to the automatic mode, if the sensor detects a drop in the domestic

environmental air quality, the hood activates, purifying and sanitizing the air until the

original balance is reestablished.

CHARCOAL

The active material is carbon, which is mainly in the form of graphite microcrystals.

These are treated in order obtain a porous structure with a large internal surface

area. Thanks to these characteristics it has a high absorbent capacity, being able to

hold the molecules of many types of substances on its inner surface.

ZEOLITE

Zeolite is a mineral with high microporosity. It is sought for its ability to absorb organic

compounds and water vapor. This is due to the particular characterisitics of their

regular and microporous crystalline structure; the crystals have a large amount of

empty space.

The combined use of coal and zeolite in a single system of filters allows for good

filtration and increases the purification capacity of the E.ion® System. Carbon.zeo is

this combination, used in the new filter installed in all products of the E.ion® System.

CARBON.ZEO

CLEANING AND MAINTENANCE

LEAF SENSOR

PURE AIR FACTORY

Carbon.Zeo filters do not require special maintenance. Under conditions of normal

use you should regenerate them every 18 months and replace them after 3 years.

To regenerate the Carbon.Zeo filter insert it into a normal domestic oven at a

temperature of 200°C for around 2 hours.