INSTALLATION MANUAL SIENA +
CONGRATULATIONS Congratulations and thank you for choosing a Falmec rangehood. To avoid the risks that are always present when you use an electrical appliance it is important that the rangehood is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners.
PRODUCT DESCRIPTION & CARTON CONTENTS CARTON 1 - HOOD UNIT INTEGRATED HOOD - ON BOARD HOOD Models include: SIENA + F3SN60S2, SIENA + F3SN90S2, SIENA + F3SND90S2 Included in the carton: 1. Main hood housing including control module and lighting 2. Baffle filters 3. Grease trap 4. Fixing screws 5.
SIENA + 56 / 87 F3SN60S2 F3SN90S2 247 12 184 332 389 379 / 665 280 280 88 505 / 815 541 / 851 150 541 / 851 250 512 / 822 EN - HOLE MEASUREMENTS FOR INSTALLATION IT - MISURE FORO PER INCASSO 4
SIENA + 87 DEEP F3SND90S2 326 248 12 98 326 382 584 360 360 88 815 851 150 851 330 824 EN - HOLE MEASUREMENTS FOR INSTALLATION IT - MISURE FORO PER INCASSO 5
STEP 1: Minimum distance by cooktop. STEP 2: Wall unit hole. STEP 3: You push the hood in wall unit hole.
STEP 4: You screw the blocking devices. STEP 6: Attach the male plug of the rangehood unit to the main power supply. STEP5: Connect the hood outlet (in the top or back ducted position) to 150mm ducting leading to an external output. STEP 7: Assembling the metal filters.
SEQUENCE FOR REMOVING THE HOOD STEP 8: Remove the metal filters. STEP 10: With your finger enter the hole and pull the lever to unlock the stop. STEP 9: Remove the cover caps.
SAFETY INSTRUCTIONS AND WARNINGS After the stainless steel hood has been installed, it will need to be cleaned to remove any residues remaining from the protection adhesive as well as any grease and oil stains which, if not removed, can cause irreversible damage to the hood surface. To properly clean the unit, the manufacturer recommends using the supplied moist wipes, which are also available sold separately.
OPERATION USING THE RADIO CONTROL OPERATING YOUR CONTROL PANEL WITH THE 6 BUTTON TOUCH CONTROL WARNINGS! Turning the extraction function ON or OFF: • In standby mode, press button 2 to turn on operating mode, then press buttons 3 through to 5 to change the speed. • The hood has three speed options and a boost speed plus the 24 recirculating mode. • To turn hood off, press button 2 repeatedly until hood returns to standby mode. Place the hood away from sources of electromagnetic waves (e.g.
DISPOSAL AFTER END OF USEFUL LIFE The crossed-out trash or refuse bin symbol on the appliance means that the product is WEEE, i.e. “Waste electrical and electronic equipment'', accordingly it must not be disposed of with regular unsorted waste (i.e.
PROFESSIONAL WARRANTY All FALMEC Professional range hoods come with a 3 year parts and labour warranty. PRKS will correct, free of charge, any defects in material or workmanship for the period of 3 years, subject to the terms of our warranty stated below. OUTDOOR USE OF PROFESSIONAL RANGEHOODS Outdoor BBQ models from the Falmec Professional series are warranted for use above barbecues and in alfresco areas with one open wall and a solid roof such as that they are not exposed to the elements.
NOTE - NOTES 13
NOTE - NOTES 14
NOTE - NOTES 15
Code 110033078 Ed.
