INSTALLATION MANUAL SIENA SERIES 4 NOV 2016 - V 1.
CONGRATULATIONS Congratulations and thank you for choosing a Falmec rangehood. To avoid the risks that are always present when you use an electrical appliance it is important that the rangehood is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners.
PRODUCT DESCRIPTION & CARTON CONTENTS CARTON 1 - HOOD UNIT INTEGRATED HOOD - ON BOARD HOOD Models include: SIENA F3SN60S1, F3SN90S1 and F3SND90S1 Included in the carton: 1. Main hood housing including control module and lighting 2. Baffle filters 3. Grease trap 4. Fixing screws 5.
SAFETY INSTRUCTIONS AND WARNINGS Installation operations are to be carried out by skilled and qualified installers in accordance with the instructions in this booklet and in compliance with the regulations in force. DO NOT use the hood if the power supply cable or other components are damaged: disconnect the hood from the electrical power supply and contact the Dealer or an authorised Servicing Dealer for repairs. Do not modify the electrical, mechanical or functional structure of the equipment.
OPERATION OPERATING YOUR CONTROL PANEL WITH THE 6 BUTTON TOUCH CONTROL Turning the extraction function ON or OFF: • In standby mode, press button 2 to turn on operating mode, then press buttons 3 through to 5 to change the speed. • The hood has three speed options and a boost speed plus the 24 recirculating mode. • To turn hood off, press button 2 repeatedly until hood returns to standby mode.
USING THE RADIO CONTROL 2) - PAIRING THE RADIO CONTROL WITH THE HOOD USING THE ELECTRONIC PUSHBUTTON PANEL WARNINGS!: The radio control is optional. Follow the entire procedure described below if purchased. Place the hood away from sources of electromagnetic waves (e.g. microwave ovens), which could interfere with the radio control and with the hood electronics. The maximum operating distance is 5 metres, that may vary according to the presence of electromagnetic interferences.
MAINTENANCE DISPOSAL AFTER END OF LIFE Before cleaning or carrying out maintenance operations, disconnect the equipment by removing the plug or switching off the main switch. Do not use detergents containing abrasive, acidic or corrosive substances or abrasive cloths. Regular maintenance guarantees proper operation and performance over time. Special attention is to be paid to the metal anti-grease filters: frequent cleaning of the filters and their supports ensures that no flammable grease is accumulated.
FUMES DISCHARGE (SIENA F3SN60S1, F3SN90S1 and F3SND90S1 ONLY) In this version the fumes and vapours are discharged outside through the exhaust pipe. To this end, the hood outlet fitting must be connected via a pipe, to an external output. The outlet pipe must have: • A diameter not less than that of the hood fitting. • A slight slope downwards (drop) in the horizontal sections to prevent condensation from flowing back into the motor. • The minimum required number of bends.
HOOD INSTALLATION GUIDE - INTEGRATED HOODS - ON BOARD MOTOR INTEGRATED HOOD Models include SIENA F3SN60S1, F3SN90S1 and F3SND90S1 WARNING DIMENSIONS ARE ACCURATE AT THE TIME OF PRINTING, PR KITCHEN & WASHROOM SYSTEMS PTY LTD RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. FOR BUILDING PURPOSES THE UNIT SHOULD BE PROVIDED TO THE CABINET MAKER / BUILDER / KITCHEN DESIGNER FOR EXACT MEASUREMENTS.
HOOD INSTALLATION GUIDE - INTEGRATED HOODS - ON BOARD MOTOR STEP 4: The returns on the main body are now exposed. These are used to fix the main body on to the cabinetry. Place the hood in the cabinet in the level position ensuring that the controls and display will be visible when standing in front of the unit. Using the pre-drilled mounting holes, screw the hood into position. STEP 5: Once the main body is secure into the cabinetry the stainless steel fascia can then be slid inside the main body.
1 2 60 650m0 m 3 1 2 4 3 4
5 6 2 7 1 2 8 1 2 3
SIENA 60 / 90 379 / 688 238 331 341 247 280 280 87 505 / 815 560 / 870 15 0 250 512 / 822 CUTOUT DIMENSIONS
SIENA 90 DEEP 228 87 10 804 870 321 353 326 236 562 380 150 330 814 CUTOUT DIMENSIONS
PROFESSIONAL WARRANTY All FALMEC range hoods and remote motors come with a 5 year parts and labour warranty. PRKS will correct, free of charge, any defects in material or workmanship for the period of 5 years, subject to the terms of our warranty stated below. In addition to this warranty stated above, all remote motors from both the Designer and Professional series are covered for an additional 5 years motor replacement warranty. This warranty will be void if any model is used for commercial purposes.
PROFESSIONAL WARRANTY OUTDOOR USE OF PROFESSIONAL RANGEHOODS Outdoor BBQ models from the Falmec Professional series are warranted for use above barbecues and in alfresco areas with one open wall and a solid roof such as that they are not exposed to the elements. Professional BBQ models MUST only have the specified 2010 m3/h motor installed in conjunction with the hood.
