Specifications

17
Phase 2
(Fig. D1 ) Hoods with wall fume outlet
1) Connect the hood to the fume exhaust pipe using the provided fitting.
(Fig. D2 ) Hoods with ceiling fume outlet
1-2) Detect the optimal height H of the fume exhaust pipe. Fasten the flue (C) to the hood body
using 4 “V2” screws.
3) Place the brackets (L) on the wall, ensuring it is perfectly levelled.
4) Mark the drilling points.
5) Drill using a ø 8mm tip, insert 2 expansion plugs and lock the bracket (L) to the wall with 2
screws (V4).
6) Place the extension (P) inside the flue (C) and make it scroll upwards or downwards until
obtaining the required height.
7) Screw the extension (P) to the bracket (L) using the two screws (V3).
Phase 3
1) Perform the electric connection (only after having disconnected the power supply).
2) Remount glass “V”, which has been previously removed.
3) Power the hood complying with the regulations in force (see sec. D of the booklet).
English