Specifications
19
Phase 4 (optional) (fig. O5)
- Insert the extension (H) in the chimney (G) and fasten it to the body of the hood using the 8
screws (V2).
- Slide the extension (H) until it reaches the desired height.
- Having found the ideal position, place the bracket (L) on the wall, verify the horizontal align-
ment with a spirit level and mark 2 drilling points at the ends.
- Drill, insert two ΓΈ 4mm expansion plugs and fasten the bracket (L) with the relative screws.
- Fasten the extension (H) to the bracket (L) using the screws (M).
Phase 5
- Put the inside panel (C), the metal filters and the perimeter suction panel back on the hood.
- Power the hood complying with standards in force (sec. D).
English