User's Instructions

8-2. Engine stop operation

 Other Engine Stop Conditions

The engine will stop if one of the following conditions is true.

1) The hood is opened.

2) The shift lever is put in a position other than the “P” position.

3) A door is opened.

4) The push start switch is pressed.

5) The pre-set warm up time has elapsed.

6) The brake pedal is engaged.

7) The accelerator pedal is engaged (the engine stops by the rpm restriction).

8) There is an advanced key or smart key inside the vehicle.

 If the engine is started with the push start switch, it cannot be stopped with the

remote control.

 The vehicle cannot be driven when the engine is started using the remote

control. To start driving the vehicle, stop the engine with the remote control or

opening the vehicle’s doors and restart the engine using the vehicle's push

button start switch.

Note

Press F switch

Operation

Indication

Press STOP switch

while LED light

(green) is flashing

(approx. 3 seconds)

 Press switches until sound is heard.

 Release F switch when beep sound

is heard

LED light color:

Engine stop

Engine not stopped* or

Communication error

* Radio signal from remote

controller not received.

Operate in reception range.

Green

Red

 The controller buzzer will sound if the engine is stopped for reasons other than

opening a door or the pre-set engine warm-up time has elapsed.

Note

⇒P. 1 3