User's Instructions

21
Problem Check Item Troubleshoot
The wipers do not
operate when the
engine is started with
Remote Engine Start
―
The wipers will not operate when the
engine is started with Remote Engine
Start, even if the wiper switch is at the
"AUTO" position.
In addition, with some vehicle models the
wipers will not operate when the wiper
switch is at the "Low" or "Hi" position
either.
Engine does not stop
using remote control
Did you make a mistake
with the “Engine stop”
operation on the remote
control?
Refer to the “Engine stop operation”
section on P.15.
When the Fswitch or START
switch was pressed, was
another switch pressed at
the same time or ahead of
those switches?
Do not press another switch at the same
time or ahead of the stop switch.
Was the engine started
using another method other
than the Remote Engine
Start?
When the engine has been started using
the vehicle's push start switch, the engine
cannot be stopped by using the remote
control.
Warm up time check
does not work
Did you make a mistake
with the "Warm up time
check" operation on the
remote control?
Refer to the "Warm up time check"
section on P.16.
When the Fswitch or START
switch was pressed, was
another switch pressed at
the same time or ahead of
those switches?
Do not press another switch at the same
time or ahead of those switches.
Was the engine started
using another method other
than the Remote Engine
Start?
When the engine has been started using
the vehicle's push start switch, the
remaining warm-up time cannot be
checked.
Engine is started,
but remaining
engine warm-up
time is not displayed
on the remote
control.
Was the engine started
using the vehicle's push
start switch?
When the engine has been started using
the vehicle's push start switch, the
remaining warm-up time is not displayed
on the remote control.
Warm up time
settings does not
work
Did you make a mistake
with the "Warm up time
settings" operation on the
remote control?
Refer to the "Warm up time settings"
section on P.17
When pressing the START
switch and the STOP switch
at the same time, was the F
switch pressed first, or is
the F switch also being
pressed at the same time?
Do not press the F switch first or press it at
the same time as the other two switches.