User's Manual

- 7 -

Stopping the engine.

Operation of the Transmitter

Push the stop button while the indicator

is blinking (about 2 seconds).

Let go of the request button when the

indicator blinks.

Push the request button

The blinking indicator will change to a

continuous light (about 3 seconds), and the

engine-stopping signal will be transmitted

・ Note that when starting the engine, factors such as cars having noisy fan motors or other wireless

devices may affect the Transmitter and reduce the operation range.

・ Wait for two seconds or more after the indicator lamp goes out before pushing the switch again

for repeated starting or stopping of the engine. Two seconds or more must pass before the next

wireless transmission.

・ The engine will automatically stop within approx. 10 minutes after starting the engine with the

transmitter if the engine is not stopped.

The time for automatically stopping may shorten when the engine is repeatedly started and stopped

by the remote control.

・ The engine cannot be stopped with the Transmitter if the engine has been started with the ignition

switch.

REQ

The engine stops.

ADVICE