User's Manual
Table Of Contents
- User Manual
- 1. Copyright
- 2. Trademarks
- 3. Warnings and safety notices
- 4. Limitation of liability
- 5. About this manual
- 6. Device layout
- 7. Package contents
- 8. Getting started
- 8.1 How to switch the device ON or OFF
- 8.2 Home screen and synchronization
- 8.3 LED colors
- 8.4 How to access the dashboard
- 8.5 How to find your device’s serial number
- 8.6 How to charge the device
- 8.7 How to charge the device wirelessly
- 8.8 How to change the battery /
- 8.9 How to use the battery
- 8.10 How to read an NFC card
- 8.11 About the SIM slots
- 9. Technical specifications
- 10. Warranty information
- 11. Safety and general information
- 空白页面
- 空白页面
12
To charge the device, only use micro USB port (option 1) or the jack
charger (option 2) with the respective cables supplied:
1. Insert the charger cable carefully. Check that the plug and socket
are aligned.
2. The indicator light will turn red to indicate that the device is
charging and will turn green when full charge level is reached.
3. The battery will reach full change in 5 hours.
Connecting the charger improperly may cause serious damage
to the device. Any damage caused by misuse is not covered by
the warranty.
Please do not charge from Micro USB port and DC jack or
Wireless charger at the same time.
If you charge using a wall charger, please use the one provided
in the box (type HA-19050100VU or HJ01A-0500100)
Note: The device will power off automatically when the battery reaches
2%.
Note: You can use the device while it is being charged. In this case, the
battery may take longer to fully charge.
8.7 How to charge the device wirelessly
The device has a built-in wireless charging coil. You can charge the
battery using a wireless charger (sold separately).
1. Connect your charger to power. Use the power adapter that came
with your accessory or a power adapter recommended by the
manufacturer.