User Manual

1.Slide the wing tube into the fuselage. Install the left and right wing (with nacelles on) over the wing

tube and into the wing slot of the fuselage (fig3).

Notice: The connectors on both sides should be attached precisely and firmly.

2.Secure the left and right wings to the fuselage using the screws included (fig4).

3.Connect the power lines and signal lines from the wings to the parallel power connectors (with UBEC)

and Y-harness connected to the receiver in the fuselage (fig5)

fig3

Model Assembly

HKM3.0*16

fig4

fig5