Instruction Manual

This publication contains the installation, operation
and maintenance procedures for standard units of
the
Inline Corrosive Resistant Fans
Carefully read this publication prior to installation.
Receiving and Inspection
Carefully inspect the fan and accessories for any
damage or shortage upon receiving the fan.
• Turn the wheel by hand to ensure it turns freely and
does not bind.
• Inspect dampers (if included) for free operation of all
moving parts.
• Remove shipping tape.
• Record on the Delivery Receipt any visible sign of
damage.
Storage
If the fan is stored for any length of time prior to
installation, store it in its original shipping crate and
protect it from
dust, debris and weather.
WARNING
This unit has rotating parts. Safety precautions should be
exercised at all times during installation, operation, and
maintenance.
ALWAYS disconnect power prior to working on fan.
PERSONAL SAFETY
Disconnect switches are recommended. Place the
disconnect switch near the fan so that the power can
be swiftly cut off in case of an emergency,
and so that maintenance personnel are provided
complete control of the power.
INSTALLATION, OPERATION, AND MAINTENANCE MANUAL
Inline Corrosive Resistant Fans
Installation
Electrical Supply
The ICF comes prewired to high speed and a 3 prong power cord is supplied.
Check that the voltage and circuit details on the fan are suitable for your supply.
Caution: Never work on a fan unless power is turned off.
Wiring
All wiring should be carried out in compliance with regulations for electrical installations and comply with
any local requirements.
Caution: Never work on a fan unless power is turned off.
Rotating
The direction of rotation, looking into the hub of the blower, is clockwise.
Mounting
The Inline Corrosive Fans (ICF) are directly mounted into the duct, fixed by clamps or duct tape.
Due to the very low height, the ICF is ideal for use in false ceilings. Six foot three-prong power
cord premounted to fan.
Motor Speeds
The ICF has capabilities of running on 3 speeds depending how it is wired (See wiring diagram).
Fan comes prewired to high-speed.
Corrosion Resistance
The ICF is corrosion resistant. The motor is totally encapsulated in a polypropylene cover.
The ICF is not to be used in an explosive environment.
Applications:
-Chlorine Applications
-Fume Cabinets