Installation Guide

Figure 7
How to Assemble Your Light Kit and Ceiling Fan Blades (continued)
Figure 6
Light Kit
Light Kit
Glass
13
Lower Housing
Assembly
Lower Housing
Assembly
6.
Assemble the light kit to the lower housing
assembly using the two key slots. Replace the
removed screw and secure all three screws.
(Figure 6)
Figure 5
5. Remove one of the three screws in the lower
housing assembly. Retain the screw for later and
slightly loosen the remaining two screws. (Figure 5)
7. Secure the glass to light kit by twisting in a
clockwise direction. Do not over-tighten. (Figure 7)
How to Operate Your Ceiling Fan
1. IMPORTANT: Using a full range dimmer switch
(not included) to control fan speed will damage the fan.
To reduce the risk of fire or electrical shock, do not use
a full range dimmer switch to control the fan speed.
(Figure 1)
Figure 1
For illustrative purposes only-not
intended to cover all types of controls