Installation Guide

Lowes.com/harborbreeze

FINAL ASSEMBLY INSTRUCTIONS

4. Place a blade (K) on the bottom of a blade holder arm

(J), positioning the holes over the threaded posts.

Tighten the washer-head screws (BB) to secure the

blade (K) and blade holder arm (J). Repeat for the

other blade (K).

Hardware Used

Washer-Head

Screw

x 6

5. Connect the pin connectors from the socket plate

assembly (H) to the pin connectors from the motor

(A).

6. Remove one of the preassembled socket plate

assembly screws (MM) inside the lower housing

assembly (G). Assemble the socket plate assembly

(H) to the lower housing assembly (G) using the two

keyslots in the socket plate assembly (H). Replace

the third socket plate assembly screw (MM) and

securely tighten all three.

Hardware Used

Socket Plate

Assembly Screw

x 3