Installation Guide

Figure 4

Figure 5

How to Hang Your Ceiling Fan

1. Securely attach the outlet box acceptable for ceiling

fan support into the building structure. Outlet box is not

supplied with the fan. (Figure 2)

Figure 1

WARNING

To avoid possible electrical shock, be sure electricity is

turned off at the main fuse box before hanging.

NOTE: If you are not sure if the outlet box is grounded,

contact a licensed electrician for advice, as it must be

grounded for safe operation.

WARNING

The fan must be hung with at least 7´ of clearance from

floor to blades. (Figure 1)

Floor

Ceiling

less than

7 ft

Figure 2

NOTE: Supply wires

omitted for clarity

Outlet Box

2. Using the outlet box screws provided with the outlet box,

securely attach the ceiling bracket to the outlet box as

shown. (Figure 3)

4. Hang the motor assembly from the hook on the ceiling

bracket assembly as shown. (Figure 5) You can now

proceed with the electrical wiring of your fan.

Figure 3

Outlet Box

WARNING

The outlet box must be securely anchored and capable

of withstanding a load of at least 35 lbs. Hanger bracket

must seat

rmly against outlet box. If the outlet box is

recessed, remove wallboard until bracket contacts box.

If bracket and/or outlet box are not securely attached,

the fan could wobble or fall.

Ceiling Bracket

Assembly

Ceiling Bracket

Assembly

3. Remove and retain two opposing screws from the motor

assembly, then loosen the remaining two screws. (Figure 4)

Motor Assembly