Installation Guide

NOTE: If you are uncertain of part description, refer to exploded view illustration.
1. Check to see that you have received the following parts:
Unpacking Instructions
For your convenience, check-off boxes are provided next to each step. As each step is completed, place a check
mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should
you be interrupted.
Ceiling Canopy (1)
Hanger Bracket
Assembly (1)
Motor Assembly (1)
Blade Holder Set (1)
Blade Support Set (1)
Blade Plate Set (1)
Blade Set (1)
Light Plate Assembly (1)
This manual is designed to make it as easy as possible for you to assemble,
install, operate and maintain your ceiling fan
Tools Needed for Assembly
(Not included)
ne hillips head screwdriver
One stepladder
nstalled ire ength
ire i e
Before assembling your ceiling fan, refer to section
on proper method of wiring your fan (page 11). If you
feel you do not have enough wiring knowledge or
experience, have your fan installed by a licensed
electrician.
WARNING
!
One wire stripper
p to ft
ft
One lade
screwdriver
Materials
iring outlet o and o connectors ust e of type
re
uired y the local code he ini u wire would e a
conductor wire with ground of the following si e:
NOTE:
Place the parts from the loose parts bags in a small
container to keep them from being lost. If any parts are
missing contact your local retailer.
Light Kit/Glass Assembly (1)
Motor Coupling
Cover Assembly (1)
Canopy Screw
Cover Assembly (1)
4
Do not install or use fan if any part is damaged or missing. This product is designed to use only those parts
supplied with this product and/or any accessories designated specifically for use with this product by
Fanimation. Substitution of parts or accessories not designated for use with this productby Fanimation could
result in personal injury or property damage.
Hand-held Remote (1)
Wall Plate (1)
Screws (2)
Batteries (2)
Receiver (1)
Wire Connectors (9)
Hardware Bags
Downrod/Hanger Ball
Assembly (1)
– Downrod (1)
– Hanger Ball (1)
– Clevis Pin (1)
– Hairpin Clip (1)
– Set Screw (1)
– Pin (1)
Wire Connectors (4)
3/16˝ -24
Serrated Head Screws (37)
1/4˝ -20 Pan Head
Screws with lock washer (22)