Dimensions Guide

AireDécor
By Fanimation®
BP200**1
Series Ceiling Fans
INSTALLATION REQUIREMENTS:
Fan must be attached to a securely anchored electrical junction box
capable of withstanding a load of at least 35 lbs.
ELECTRICAL REQUIREMENTS:
Requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15
amp circuit.
MOTOR SPECS:
153 x 15 AC motor is designed for optimal performance with this fan.
BLADES:
A set of five 21
˝ traditional wood blades is included.
CONTROL OPTIONS:
LIGHTING OPTIONS:
Optional lighting fitters and light kits are available. See our catalog or
DOWNROD OPTIONS:
LOCATION USE:
Series fans are rated for dry locations only.
Airflow / Energy Efficiency Info (120V)-Standard
Fan Speed Max RPM CFM CFM / Watts Amps Watts
High 154 4286 85 0.42 50
Med 100 2647 134 0.27 20
Low 55 1410 189 0.16 7
Available Finishes
Fan / Housing Assembly Blades - Traditional
MW – Matte white Matte white
OB – Oil-rubbed bronze Cherry / walnut reversible
SN – Satin nickel Cherry / walnut reversible
7´ min
Floor
Ceiling
12° Blade Pitch
12° Blade Pitch
Net Hanging Weight: 15.28 lbs
5.17˝ dia 5.17˝ dia
Blade Sweep = 52˝ dia
Blade Sweep = 52˝ dia
A
A
B
B
7´ min
A B
Fan w/4.5˝ downro
Fan w/12˝ downrod 20.70˝ 18.60˝
Fan w/18˝ downrod 26.70˝ 24.60˝
Fan w/24˝ downrod 32.70˝ 30.60˝
Fan w/36˝ downrod 44.70˝ 42.60˝
Fan w/48˝ downrod 56.70˝ 54.60˝
Fan w/60˝ downrod 68.70˝ 66.60˝
Fan w/72˝ downrod 80.70˝ 78.60˝
13.20˝ 11.10˝
A B
Fan In Close to
Ceiling Configuration
9.63˝ 7.74˝
Optional CW1, CW1SW, CW2, CW5, CWRL4 and CW60WH wall controls
available—sold separately. Optional BTCR9, C4, CRL4WH and CRL8TS
remote controls with receiver unit and BTR9 receiver unit are available
—sold separately. Instructions are provided with each control.
Power
(W
ave
)
Total Air Delivery
(CFM
ave
)
Estimated Yearly
Energy Cost ($)
Ceiling Fan
Efficiency
(CFM/W)
30 2581 8 85
Energy Guide FTC (Hugger)
Power
(W
ave
)
Total Air Delivery
(CFM
ave
)
Estimated Yearly
Energy Cost ($)
Ceiling Fan
Efficiency
(CFM/W)
30 2938 8 97
Energy Guide FTC (Standard)
visit www.fanimation.com for available lighting options.
Dual mount for flush mount application or 1˝ dia x 4.5˝ long downrod.
Optional downrods available in 12˝, 18˝, 24˝, 36˝,48˝, 60˝, and 72˝
lengths. A downrod coupler is available for installations requiring a
downrod longer than 72˝. Fan can be mounted on a sloped ceiling up to
19°. Optional sloped ceiling kits (SCK1-52) are available for slope an
angles up to 42°. Optional close-to-ceiling kit is available as well-sold
separately. Most sloped ceiling installations require a downrod longer
than the standard 4.5 ˝ downrod. Call technical support for more
information.
Airflow / Energy Efficiency Info (120V )-Hugger
Fan Speed Max RPM CFM CFM / Watts Amps Watts
High 153 3818 76 0.42 50
Med 100 2240 113 0.27 20
Low 56 1180 159 0.16 7