Specification Sheet

A3
37
ENIGMA
®
FP2120**
Ceiling Fan
7´ min
Floor
Ceiling
Blade Sweep
60˝ dia
Net Hanging Weight: 38 lbs
6.55˝ dia
18° Blade Pitch
A B
Fan w/6˝ downrod 17.53˝ 11.02˝
Fan w/12˝ downrod 23.53˝ 17.02˝
Fan w/18˝ downrod 29.53˝ 23.02˝
Fan w/24˝ downrod 35.53˝ 29.02˝
Fan w/36˝ downrod 47.53˝ 41.02˝
Fan w/48˝ downrod 59.53˝ 53.02˝
Fan w/60˝ downrod 71.53˝ 65.02˝
Fan w/72˝ downrod 83.53˝ 77.02˝
*Minimum Pole Lengths for Sloped Ceilings
Degrees / Pitch
Minimum Pole
Length
Blade Tip to
Ceiling Dimension
18° / 4 - 12 pitch 12˝ (DR1-12**) 6½˝
27°- 30° /
6 - 12 to 7 - 12
18˝ (DR1-18**) 4½˝
**Custom Finishes are available by special order only.
Contact technical support for more information
INSTALLATION REQUIREMENTS:
Ceiling fan must be secured to a structural member, such as a
ceiling joist, capable of withstanding a load of at least 50 lbs. A
3
/8˝ x 5˝ long lag bolt passes through loop in ceiling support cable,
hanger bracket plate, and into wood structural member above.
ELECTRICAL REQUIREMENTS:
Requires a grounded electrical supply line of 120 volts AC, 60 Hz,
15 amp circuit.
MOTOR SPECS:
188 x 18 motor is designed for optimal performance with this fan.
CONTROL OPTIONS:
TR24WH hand-held remote control with canopy-style receiver unit (RECAN34) isincluded. Push-button remote control has
3 speeds, downlight controls and off button. Optional CWRL4 and C25 wall controls, CRL4WH and CRL8TS hand-held remote
controls are available—sold separately. See our catalog or visit www.fanimation.com for more information. Instructions are
provided with each control.
LIGHTING OPTION:
Single built-in downlight socket uses PAR 30 short-neck, 75 watt max., halogen bulb (not included).
DOWNROD OPTIONS:
Fan comes with a 1˝ dia. x 6˝ long downrod (DR1-6). Optional downrods available in 12˝, 18˝, 24˝, 36˝, 48˝, 60˝ and 72˝
lengths. Fan can be mounted on a sloped ceiling up to *30°. Most sloped ceiling installations require a downrod longer
than the standard 6˝ downrod. Optional sloped ceiling ball kits (SCB1-52) are available for slope angles greater than 30°
and up to 52°. Optional close-to-ceiling kit is available as
well-sold separately. Call technical support for more information.
LOCATION USE:
FP2120MG & FP2120RB are dry and damp location rated
FP2120WA is dry location rated only
Available Finishes
MG Metro gray (Damp)
RB Red/blue iridescent (Damp)
WA Metro Gray with walnut wood blade
Airflow / Energy Efficiency Info (120V)
Fan Speed Max RPM CFM CFM / Watts Amps Watts
High 164 5796 114 0.43 50
Med 99 3208 143 0.34 22
Low 62 1693 156 0.26 11
B