Installation Sheet

PALISADE
®
FP240**
Ceiling Fan Assembly
Available Finishes
OB
Oil-rubbed bronze (Damp)
PW Pewter
RS Rust (Damp)
INSTALLATION REQUIREMENTS:
Fan uses a ball and bracket hanging system; must be secured to
a structural member, such as a ceiling joist, capable of with
standing a load of at least 100 lbs. A 3/8˝ x 5˝ long lag bolt passes
through loop in ceiling support cable, hanger bracket plate, and
into wood structural member above.
ELECTRICAL REQUIREMENTS:
Requires a grounded electrical supply line of 120 volts AC,
60 Hz, 15 amp circuit.
MOTOR SPECS:
Two FK2100 AC motors are designed for optimal performance with this fan.
BLADES:
A variety of palm, bamboo, and wood blades are available—sold separately; see our catalog or visit www.fanimation.com.
LIGHTING OPTIONS:
Optional lighting fitters and light kits are available. See our catalog or visit www.fanimation.com for available lighting options.
ACCESSORY OPTIONS:
Various optional accessories are available; see our catalog or visit www.fanimation.com.
LOCATION USE:
Fan is dry location rated only. Damp location rated with use of rust and oil-rubbed bronze finish fan assembly and
woven bamboo or all-weather composite blades.
Distance from Ceiling to
Bottom of Blades
A
*24˝ Pole w/18˝ Palm Blades 51˝
30˝ Pole w/22˝ Palm Blades 61˝
* 24˝ extension pole may be used
with 18˝ blades only
CONTROL OPTIONS:
CW3WH 2-speed wall control is included. Optional TR24WH hand-held remote control is available with the use of
optional SW24 receiver and CW6WH wall control —all sold separately. Instructions are provided with each control.
* The RPM is calculated in one fan heads.
Energy Efficiency Info (120V)
Motor Head with ISP4 Blade in 60˝ sweep
Fan Speed Max RPM Amps Watts
High 48 1.48 174
30 0.96 74
Low
7´ min
Floor
Ceiling
5.75˝ dia
A
40° Blade Pitch
Net Hanging Weight: 52.8 lbs
18" Blade = 64"
22" Blade = 60"~66"
Blade Sweep
18" Blade = 44"
22" Blade = 52"
EXTENSION POLE:
An extension pole coupler is available for installations requiring an extension pole longer than 72˝. Fan can be mounted on a
sloped ceiling up to 27°. Optional sloped ceiling ball kit (SCB-52) is available for slope angles greater than 27° and up to
42°. Call technical support for more information.
Fan requires the use of an extension pole—sold separately. Extension poles available in 24˝, 30˝, 36˝, 48˝, 60˝ and 72˝ lengths.