Specs

9
AMERICANA
®
FP410 / FP420
Series
Ceiling Fans
Ordering Information
Catalog No. Description
FP410

Short fan assembly
FP420

Long fan assembly
FP1018 Reversible oak/walnut blade set (sold separately)
Short Fan Assembly - FP410

Overall Height (w/o Light Kit) 25˝
Blade Sweep *
Base Diameter 16¾˝
Mounting Diameter (3-hole; centerline) 13˝
Weight: (w/o Light Kit) 32 lbs
Long Fan Assembly - FP420

Overall Height (w/o Light Kit) 39˝
Blade Sweep *
Base Diameter 16¾˝
Mounting Diameter (3-hole; centerline) 13˝
Weight: (w/o Light Kit) 41 lbs
Available Finishes
AB Antique brass
BL Black
INSTALLATION REQUIREMENTS:
Requires 3/4˝ plywood wall backing, able to support at least 100 lbs. Fan base is secured to 3/4˝ plywood backing using
three 5/16˝ lag bolts. Ceiling backing to be supplied by owner or contractor.
ELECTRICAL REQUIREMENTS:
Surface mounted electrical junction box centered in mounting location with a grounded electrical supply line of 120 volts
AC, 60 Hz, 15 amp circuit.
MOTOR SPECS:
FK2100 motor is designed for optimal performance with this fan. 220 VAC, 50 Hz export version available (antique brass
only). Reversing switch and 3-speed pull-chain included.
BLADES:
A variety of 4- and 5-blade sets are available. 5-blade sets are available in palm, bamboo, wood and composite materials.
4-blade sets are made of wood and require the use of BH20 series blade holders (not included). 4-blade sets will increase
speed and airflow. See our catalog or visit www.fanimation.com for blade options.
Note: Fan speeds will vary according to blade set—material, shape and size of blade. In general, smaller blades
will turn faster than bigger ones and narrower blades will turn faster than wider ones.
CONTROL OPTIONS:
Optional CW1, CW1SW and CW2 wall controls available—sold separately. Optional TR20 remote control available
with use of optional SW50 switch cap receiver—all sold separately. Instructions are provided with each control.
LIGHTING OPTIONS:
Optional lighting fitters and light kits are available—see our catalog or visit www.fanimation.com.
LOCATION USAGE:
FP410AB/FP420AB is rated for dry locations only. FP410BL/FP420BL is rated for dry and damp locations.
*Blade sweep varies depending on blade selection, see chart on page 79