Specification Sheet

82
ZONIX
™
FP4620** / FP4630SN
Ceiling Fan
7´ min
Floor
Ceiling
Net Hanging Weight: 20 lbs
6˝ dia
14° Blade Pitch
INSTALLATION REQUIREMENTS:
Fan must be attached to a securely anchored electrical
junction box capable of withstanding a load of at least 50 lbs.
ELECTRICAL REQUIREMENTS:
Requires a grounded electrical supply line of
120 volts AC, 60 Hz, 15 amp circuit.
MOTOR SPECS:
153 x 18 motor is designed for optimal performance with this fan.
BLADES:
A set of three 26˝ blades is included; reversible cherry walnut for FP4620** and satin nickel for FP4630SN. Optional
sets of three 20˝ wood blades are available in reversible cherry/walnut (B4442CWR) and satin nickel (B4442SN)
finishes—sold separately. Optional a set of three 26˝ wood blades is available in satin nickel (B4400SN) finish—sold
separately. Optional sets of three 20˝ composite blades are available in cherry (BPW4442CY) and walnut (BPW4442WA)
finishes—sold separately.
CONTROL OPTIONS:
CW40 fan-only wall control is included. Reversing switch located on fan housing. Instructions are provided with each
control. Optional CW1, CW1SW, CW2, CW5 and CWRL4 wall controls and CRL4WH and CRL8TS remote controls with
receiver unit are available—sold separately. Instructions are provided with each control.
LIGHTING OPTION:
A single-bulb downlight fixture with 13 watt, energy-efficient CFL bulb included is available—sold separately. Maximum
downlight wattage not to exceed 13 watts. NOTE: Fan supplied with fan only wall control. Light kit will require use of
CW1, CW1SW, CW2, CW5 and CWRL4 wall controls and/or CRL4WH and CRL8TS remote controls with receiver unit
—sold separately. Optional lighting fitter and light kits are available. See our catalog or visit www. fanimation.com for
available lighting options.
DOWNROD OPTIONS:
A downrod coupler is available for installations requiring a downrod longer than 72˝. Fan can be mounted on a sloped ceiling
up to 30°. Most sloped ceiling instal
lations require a downrod longer than the standard 6˝ downrod. Optional sloped ceiling ball
kits (SCB1-52) are available for slope angles greater than 30° and up to 52°. Optional close-to-ceiling kit is available as well-
sold separately. Call technical support for more information.
LOCATION USE:
Fan is rated for dry locations only, however, is damp location rated if used with composite blades listed above.
Airflow / Energy Efficiency Info (120V)
Fan Speed Max RPM CFM CFM / Watts Amps Watts
High 130 4260 75 0.48 57
H-Med 93 3142 104 0.35 31
L-Med 68 2363 125 0.2 19
Low 40 155 0.17 8
Available Finishes
OB Oil-rubbed bronze—reversible cherry/walnut
PN Polished Nickel—reversible cherry/walnut
SN Satin nickel—reversible cherry/walnut (FP4620**)
SN Satin nickel—satin nickel (FP4630SN)
A
Blade Sweep
26˝ Blade = 54˝ dia
20˝ Blade = 42˝ dia
B
A B
Fan w/6˝ downrod 15.40˝ 12.90˝
Fan w/12˝ downrod 21.40˝ 18.90˝
Fan w/18˝ downrod 27.40˝ 24.90˝
Fan w/24˝ downrod 33.40˝ 30.90˝
Fan w/36˝ downrod 45.40˝ 42.90˝
Fan w/48˝ downrod 57.40˝ 54.90˝
Fan w/60˝ downrod 69.40˝ 66.90˝
Fan w/72˝ downrod 81.40˝ 78.90˝
1262
Fan comes with a 1˝ dia. x 6˝ long downrod (DR1-6). Optional downrods available in 12˝, 18˝, 24˝, 36˝, 48˝, 60˝ and 72˝ lengths.
Optional Light Kit
LK4620**