Installation Guide

1. Remove the switch cover from the switch cup

cover assembly by twisting in a counterclockwise

direction. Retain the switch cover for Step 6.

(Figure 1)

2. Remove one of the three screws in the support-

cover switch cup and retain the screw for Step 5.

Slightly loosen the remaining two screws and remove

the inner-switch cup. Retain the inner-switch cup for

reassembly in Step 5. (Figure 2)

3. Remove the three screws in the support bracket at

the bottom of motor assembly and retain the screws

for later. (Figure 3)

4. Attach the support-cover switch cup to the support

flange using the previously removed three screws

and fully tighten. (Figure 4)

5. Assemble the inner-switch cup to the support-cover

switch cup using the two key slots in the inner-switch

cup. Replace the previously removed screw and

securely tighten all three screws. (Figure 5)

Motor Assembly

Figure 1

Switch Cover

Support-Cover

Switch Cup

Support-Cover

Switch Cup

Support-Cover

Switch Cup

Inner-Switch Cup

Figure 2

Figure 4

Figure 5

How to Mounting Your Switch Cup Cover Assembly (for MA4660)

Figure 3

Switch Cup Cover

Assembly

Motor Assembly