Installation Guide

How to Install Your Canopy Housing

2. Securely attach and tighten the canopy screw cover

over the shoulder screws in the hanger bracket utilizing

the keyslot twist-lock feature. (Figrue 19)

How to Wire Your Ceiling Fan (continued)

5. After connections have been made, turn leads

upward and carefully push leads into the outlet box,

with the white and green leads to one side of the

box and the black leads to wards the other side.

Figure 18

Ceiling Canopy

1. Remove one of the two shoulder screws in the

hanger bracket. Loosen the second shoulder screw

without fully removing it. Assemble canopy by

rotating key slot in canopy over shoulder screw in

hanger bracket. Tighten shoulder screw. Fully

assemble and tighten second shoulder screw that

was previously removed. (Figure 18)

WARNING

To avoid possible fire or shock, make sure that the

electrical wires are completely inside the canopy

housing and not pinched between the housing and the

ceiling.

NOTE: This step is applicable after the neccessary wiring is completed.

Figure 19

Canopy Screw

Cover

Figure 17

BLACK

BLUE

GREEN - Ground Wire From

Hanger Bracket

BLACK-ANT

LISTED OUTLET BOX

GREEN - Ground Wire

From Hanger Ball

WHITE