Installation Guide

How to Install Your Remote Control (Option #1)
How to Install Your Remote Control (Option #2)
How to Install Your Remote Control (Option #3)
1. Drill two 1/4” holes in the wall and push the M6 plastic
anchors into the holes. Install the control bracket using
the two #3 - 1” self tap screws. Push in the four plastic
plugs to cover the screw holes. (Included in the control
packaging). (Figure 1)
1. Unthread two screws from the wall switch plate.
(Figure 1)
2. Install the control bracket with two #6-32 x 1” screws
and push in the four plastic plugs to cover the screw holes.
(Included in the control packaging). (Figure 2)
1. Unthread two screws from the wall switch plate.
(Figure 1)
2. Install the control bracket with two #6-32 x 3/4” screws
and push in the four plastic plugs to cover the screw holes.
(Included in the control packaging). (Figure 2)
Figure 1
Figure 1 Figure 2
Figure 1 Figure 2
15