Dimensions Guide
INSTALLATION REQUIREMENTS:
Ceiling fan attaches to electrical junction box securely anchored
and capable of withstanding a load of at least 35 lbs.
ELECTRICAL REQUIREMENTS:
Ceiling fan requires a grounded electrical supply line of 120 volts
AC, 60 Hz, 15 amp circuit.
MOTOR SPECS:
153 x 15 AC motor is designed for optimal performance
with this fan.
BLADE SETS:
A set of five 21˝ reversible plywood blades is included.
Airflow / Energy Efficiency Info (120V)
Fan Speed Max RPM CFM
CFM / Watts
Amps Watts
170 5279 97 0.45 54
120 3773 138 0.34 27
63 2060 189 0.22 11
High
Med
Low
AIRE DELUXE
™
FP6285**
52˝ Ceiling Fan
Available Finish
BN
Brushed Nickel With Cherry/Dark Walnut Blade
and Frosted White Glass
DZ
Dark Bronze With Cherry/Dark Walnut Blade
and Frosted White Glass
MW
Matte White With Matte White Blade and
Frosted White Glass
Light Bulb Information (120V)
82%GU24 / CFL
Bulb Type Watts Lumens Amount Color Temp CRI
13 3 2700 2700
QTY
Net Hanging Weight: 17.34 lbs
5.91˝ dia
Blade Sweep = 52˝ dia
12° Blade Pitch
A
B
BA
Fan w/4.5˝ downrod 10.59˝16.85˝
Fan w/12˝ downrod 18.09˝24.35˝
Fan w/18˝ downrod 24.09˝30.35˝
Fan w/24˝ downrod 30.09˝36.35˝
Fan w/36˝ downrod 42.09˝48.35˝
Fan w/48˝ downrod 54.09˝60.35˝
Fan w/60˝ downrod 66.09˝72.35˝
Fan w/72˝ downrod 78.09˝84.35˝
LOCATION USE:
Fan is rated for dry locations only.
LIGHTING OPTIONS:
Three GU24 13-watt CFL bulbs included.
DOWNROD OPTIONS:
Fan comes with 1˝ dia. x 4.5˝ long downrod. Optional downrods available in 12˝,18˝, 24˝, 36˝, 48˝, 60˝, and 72˝ lengths.
A downrod coupler is available for installations requiring a downrod longer than 72˝. Fan can be mounted on a sloped ceiling
upto 19°. Most sloped ceiling installations require a downrod longer than the standard 4.5˝ downrod. Optional close-to-ceiling
kit is available as well—sold separately. Optional sloped ceiling kits (SCK1-52) are available for up to 42°. Call technical
support for more information.
CONTROL OPTIONS:
Three fan speeds pull chain control and on/off light pull chain control included. The reverse switch is located on the
switch housing. Optional CW1SW wall control and BTCR9, CRL4WH and CRL8TS remote controls with receiver unit are
available— sold separately. Instructions are provided with each control.