Installation Guide

12
How to Assemble Your Switch Cup Assembly/Light Kit Assembly (Continued)
Figure 4A
Figure 5
Figure 6
FP6284**
FP6285B**
Light Kit
Assembly
Light Kit
Assembly
Bulb
Glass
Nut
Finial
Trim Cover
Light Kit Assembly
Switch Cup
Assembly
4A—FP6284**. Assemble the switch cup assembly to
the switch housing adapter using the previously removed
screws and securely tighten all screws. (Figure 4A)
4B—FP6285B**. Assemble the light kit assembly to the
switch housing adapter using the previously removed
screws and securely tighten all screws. (Figure 4B)
NOTE: If you have installed your fan without light kit (FP6284**)
skip Steps 5 and 6.
5. Insert light bulbs into sockets. (Figure 5)
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before
installing light kit.
CAUTION
6. Disassemble the finial, trim cover and nut in light kit
assembly. Securely attach the glass to light kit assembly
using supplied nut, trim cover and finial. Do not over
tighten. (Figure 6)
Figure 4B