Installation Guide

6. Secure the glass to the LED assembly by twisting
in a clockwise direction. Do not over-tighten. (Figure 6)
How to Assemble the Light Kitn or Cap (continued)
11
LED Assembly
Glass
Steel Cap
Figure 6
Figure 7
7. For use with steel cap
Assemble the light kit wire cover to the light plate
asseumbly using the two key slots and
replace the
third screw removed in Step 3 and securely tighten all
three screws. (Figure 7 )
8. Assemble the steel cap to the light kit wire cover
assembly by twisting in a clockwise direction.
(Figure 8)
Figure 8
Light Kit
Wire Cover
Light Kit
Wire Cover
Light Plate
Assembly