Dimensions Guide

CONTROL OPTIONS:
CW60WH-6729 wall control is included. Switch control has 3 fan speeds, infinite light levels and off button. The reverse
switch is on the motor housing. Optional CW1SW and CW2 wall conrtols available—sold separately. Optional BTCR9
and CRL4WH remote controls with receiver unit and BTR9 receiver unit are available—sold separately. Instructions are
provided with each control.
DOWNROD OPTIONS:
FP6729**
Ceiling Fan
INSTALLATION REQUIREMENTS:
Fan must be attached to a securely anchored electrical junction
box capable of withstanding a load of at least 35 lbs.
ELECTRICAL REQUIREMENTS:
Requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15
amp circuit.
MOTOR SPECS:
188 x 25 AC motor is designed for optimal performance
with this fan.
BLADES:
A set of three 24.5˝ composite blades is included.
XENO WET
™
Airflow / Energy Efficiency Info (120V)
Fan Speed Max RPM CFM CFM / Watts Amps Watts
186 7782 0.48
122 5217 0.33
79 3548
135
192
265
58
27
130.23
High
Med
Low
Available Finish
BNW Brushed Nickel with Brushed Nickel Blade
DZW Dark Bronze with Dark Bronze Blade
MWW Matte White with Matte White Blade
Light Bulb Information (120V)
Bulb Type Watts Lumens Amount Color Temp CRI
18 1440 3000 80%
LED
LIGHTING OPTIONS:
One 18-watt LED included.
LOCATION USE:
Fan is rated for dry, damp and wet locations.
Blade Sweep= 56˝ dia
Net Hanging Weight: 23.81 lbs
6.58˝ dia
B
14° Blade Pitch
A
2
(w/o light kit)
A
1
(w/light kit)
B
Fan w/4.5˝ downrod 14.54˝ 10.24˝
Fan w/12˝ downrod 22.04˝ 17.74˝
Fan w/18˝ downrod 28.04˝ 23.74˝
Fan w/24˝ downrod 34.04˝ 29.74˝
Fan w/36˝ downrod 46.04˝ 41.74˝
Fan w/48˝ downrod 58.04˝ 53.74˝
Fan w/60˝ downrod 70.04˝ 65.74˝
Fan w/72˝ downrod 82.04˝
14.54˝
22.04˝
28.04˝
34.04˝
46.04˝
58.04˝
70.04˝
82.04˝ 77.74˝
A
1
A
2
Fan comes with 1˝ dia. x 4.5˝ long wet-location downrod (DR1SS-45). Optional wet-location downrods are available in 12˝,
18˝, 24˝, 36˝, 48˝, 60˝, and 72˝ lengths. A downrod coupler is available for installations requiring a downrod longer than 72˝.
Fan can be mounted on a sloped ceiling up to 27°. Most sloped ceiling installations require a downrod longer than the
standard 4.5˝downrod. Optional sloped ceiling ball kits (SCB1-52) are available for slope angles greater than 27° and up to
42°. Optional close-to-ceiling kit is available as well—sold separately. Call technical support for more information.