Dimensions Guide

FP7500**
5-Blade Traditional Model
WINDPOINTE
®
SERIES
FP7500MW Airflow / Energy Efficiency Info (120V)
Fan Speed Max RPM CFM CFM / Watts Amps Watts
High 122 2812 67 0.37 42
Med 109 2501 73 0.33 35
Low 75 1600 96 0.23 17
FP7500AB Airflow / Energy Efficiency Info (120V)
Fan Speed Max RPM CFM CFM / Watts Amps Watts
High 86 2633 63 0.37 42
Med 82 2337 68 0.34 34
Low 57 1420 86 0.23 17
INSTALLATION REQUIREMENTS:
Fan must be attached to a securely anchored electrical junction
box capable of withstanding a load of at least 35 lbs.
ELECTRICAL REQUIREMENTS:
Requires a grounded electrical supply line of 120 volts AC, 60 Hz,
15 amp circuit.
MOTOR SPECS:
188 x 25 AC motor is designed for optimal performance with
this fan.
BLADES:
A set of five 22˝ blades is included for AB and RS fan finish.
A set of five 18˝ blades is included for MW fan finish.
CONTROL OPTIONS:
Optional CW1, CW1SW, CW2, CW5, CWRL4 and CW60WH wall
controls and BTCR9, C4, CRL4WH and CRL8TS remote controls
with receiver unit and BTR9 receiver unit are available—sold
separately.
LIGHTING OPTIONS:
Optional lighting fitters and light kits are available. See our catalog
or visit www.fanimation.com for lighting options.
DOWNROD OPTIONS:
LOCATION USE:
FP7500AB and FP7500MWare ratedfor drylocationsonly.
FP7500RSare ratedfor dryand damp locations.
Floor
Ceiling
18° Blade Pitch
Net Hanging Weight:
FP7500AB = 23.84 lbs
FP7500MW = 23.66 lbs
FP7500RS = 25.41 lbs
5.75˝ dia
Blade Sweep:
FP7500AB = 52˝ dia
FP7500MW = 44˝ dia
FP7500RS = 52˝ dia
7´ min
A
B
A B
Fan w/6˝ downrod 14.50˝ 14.00˝
Fan w/12˝ downrod 20.50˝ 20.00˝
Fan w/18˝ downrod 26.50˝ 26.00˝
Fan w/24˝ downrod 32.50˝ 32.00˝
Fan w/36˝ downrod 44.50˝ 44.00˝
Fan w/48˝ downrod 56.50˝ 56.00˝
Fan w/60˝ downrod 68.50˝ 68.00˝
Fan w/72˝ downrod 80.50˝ 80.00˝
Available Finishes
AB Antique Brass
MW Matte white
RS Rust (Damp)
FP7500RS Airflow / Energy Efficiency Info (120V)
Fan Speed Max RPM CFM CFM / Watts Amps Watts
High 95 2551 60 0.37 42
Med 86 2272 65 0.34 35
Low 68 1175 71 0.23 17
Power
(W
ave
)
Total Air Delivery
(CFM
ave
)
Estimated Yearly
Energy Cost ($)
Ceiling Fan
Efficiency
(CFM/W)
32 2374 9 74
Energy Guide FTC test with B5280 blades
Power
(W
ave
)
Total Air Delivery
(CFM
ave
)
Estimated Yearly
Energy Cost ($)
Ceiling Fan
Efficiency
(CFM/W)
33 1372 9 42
Energy Guide FTC test with ISP5 blades
Power
(W
ave
)
Total Air Delivery
(CFM
ave
)
Estimated Yearly
Energy Cost ($)
Ceiling Fan
Efficiency
(CFM/W)
33 2964 9 91
Energy Guide FTC test with ISP4 blades
Fan comes with a 1˝dia. x 6˝ long downrod (DR1-6). Optional
downrods are available in 12˝, 18˝, 24˝, 36˝, 48˝, 60˝ and 72˝
lengths. Fan can be mounted on a sloped ceiling up to 27°.
Most sloped ceiling installations require a downrod longer than
the standard 6˝ downrod. Optional sloped ceiling ball kits
(SCB1-52) are available for slope angles greater than 27° and
up to 42°. Optional close-to-ceiling kit is available as well-sold
separately. Call technical support for more information.