Installation Guide

Copyright 2017 Fanimation
2017/09
10983 Bennett Parkway
Zionsville, IN 46077
[phone] • FAX [phone]
Outside U.S. call [phone]
Visit Our Website @ www.fanimation.com
Maintenance and Cleaning
1. To clean the fan, please unplug the fan from the port and clean it with a soft cloth.
2. Do not wet or immerse the motor, oscillating mechanism, the switch, the USB power cord or the plug.
3. To clean the fan blade, please disassemble the fan by turning the front guard in counter
clockwise direction and turning the back guard in clockwise direction. Ensure the fan plug is unplugged
from the socket before dissassembling it. Please fit the cover onto the fan and tighten the screws of the guard
after maintenance and before use.
Trouble Shooting
Please follow checklist below if the fan is not working properly during use.
Trouble Suggested Remedy
If the fan does not run
after being switched on
If the blade rotates slowly,
irregularly or with abnormal noises
1. Check if the USB port is securely connected to the socket.
2. Check if the plug is knotted or tangled.
3. Check if the fan blade and the guard are jammed.
1. Check if the fan blade and the fan guard are securely fitted.
2. Check if the fan blade and the fan guard are locked.