Installation Guide

How to Operate Your Ceiling Fan
1. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box. (Figure 1)
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until the blades are in place. Noise and
fan damage could result.
WARNING
MAIN FUSE BOX
Figure 1
0: Power Off
1: Low Speed
2: Medium Speed
3: High Speed
Light Switch:
Fan Speed Switch:
0: POWER OFF,
Turn switch counterclockwise to increase
light and clockwise to dim it.
Figure 2
Figure 3
2. Wall control functiolns: (Figure 2)
12
Maintenance
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to
Abrasive cleaning agents are not required and should be
Periodic light dusting of the blades is recommended.
A feather duster will work best.
Avoid using water, cleansers, or harsh rags, which
CAUTION
Do not use water when cleaning your ceiling fan. It
could damage the motor or the finish and create the
possibility of electrical shock.
can
How to Clean Your Ceiling Fan Blades
Season
Summer
Winter
Rotation Direction Switch Position
Clockwise
Counterclockwise
Reverse Switch Information
Right
Left
3. If airflow is desired in the opposite direction, turn
the fan off and wait for the blades to stop turning.
Then, slide the reverse switch on top of motor
assembly to the opposite position and turn fan on
again. (Figure 3 )
Reversing
Switch