Installation Guide

How to Operate Your Ceiling Fan
2. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box (Figure 33).
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until the blades are in place. Noise and
fan damage could result.
WARNING
MAIN FUSE BOX
Figure 33
Assembling Fan Without the Light Kit (continued)
15
Cover Switch
cup
4. .puc hctiws revoc eht otni wercs eht nethgiT
(Figure 30)
Figure 30
5. delbmessa eht otno puc hctiws revoc eht elbmessA
switch cup support plate with three screws.
(Figure 31)
Figure 31
x 1Ŋ
PHILLIPS SCREW
HARDWARE USED:
Cover Switch
cup
Do not operate this fan with a variable (Rheostat) wall
controller or dimmer switch. Doing so could result in
damage to the ceiling fan's remote control unit.
WARNING
Figure 32
For illustrative purposes only-not
intended to cover all types of controls
1. IMPORTANT: Using a full range dimmer switch
(not included) to control fan speed will damage the fan.
To reduce the risk of fire or electrical shock, do not use
a full range dimmer switch to control the fan speed.
(Figure 32)