Installation Guide

13
How to Assemble Your Light Kit Assembly or Cap (continued)
Figure 6
Glass
LED Assembly
Light Kit
Light Kit
Figure 7
6. Assemble the LED assembly to the ligth kit using
the removed screws in step 3 and secure all three
screws. (Figure 6)
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
CAUTION
7. Secure the glass to light kit by twisting in a
clockwise direction. Do not over-tighten. (Figure 7)