Installation Sheet

How to Assemble Your Light Kit Continued)
12
Light Plate
Assembly
Light Plate
Assembly
Figure 3
3. Remove one of the three screws in the light plate
assembly and retain the screw for later. Slightly
loosen the remaining two screws. (Figure 3)
4. Connect the 2 pin connectors from the light kit
to the 2 pin connectors from motor assembly. (Figure 4)
5. Assemble the light kit to the light plate assembly
using the two key slots. Replace the screw removed in
Step 3 and secure all three screws. (Figure 5)
Light Kit
Light Kit
Light Kit
Motor
Assembly
Figure 4
Figure 5
Figure 6
Glass
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
CAUTION
6. Assemble the glass to the light kit by twisting
in a clockwise direction. Do not overtighten. (Figure 6)