Installation Guide

CAUTION: INCORRECT WIRE CONNECTION COULD

DAMAGE THIS RECEIVER.

NOTE: If fan or supply wires are different colors than indicated, haYHWKLVXQLWLQVWDOOHGE\DTXDOL¿HGHOHFWULFLDQ

MAIN FUSE BOX

Figure 1

To avoid possible electrical shock, be sure electricity

gniriw erofeb xob esuf niam eht ta ffo denrut si

(Figure 1).

WARNING

NOTE:

If you are not sure if the outlet box is

grounded, contact a licensed electrician for advice, as

LWPXVWEHJURXQGHGIRUVDIHRSHUDWLRQ

x 3

WIRE

CONNECTORS

RECEIVER HARDWARE USED:

WARNING

2. Connect wires using connectors as shown in Figure 2.

Check to see that all connections are tight, including

ground, and that no bare wire is visible at the wire

connectors. Do not operate fan until the blades are in

place. Noise and motor damage could result.

How to Wire Your Ceiling Fan

3. After connections have been made, put the white and

green leads to one side and the black leads to the

other side. The wires should be spread apart with the

grounded conductor and the equipment-grounding

conductor on one side of the outlet box and the

ungrounded conductor on the other side. (Figure 3).

Figure 3

5HFHLYHU

%/$&.

:+,7(

$&32:(5

<(//2:

*5((1

*5281'

+$1*(5

%5$&.(7

'&02725

%/$&.

$17(11$

Figure 2

02725