Installation Guide

How to Assemble Your Ceiling Fan

1. Slide the housing assembly over the motor assembly

shaft. (Figure 1)

2. Remove the three screws from the motor coupler

assembly. Assemble the wire tray assembly to the coupler

using the removed screws and securely tighten all screws.

(Figure 2)

Motor

Assembly

Motor

Assembly

Housing Assembly

Housing

Assembly

Figure 1

Figure 2

Figure 3

3. Hang the motor assembly from the ceiling bracket

assembly using the hook from the bracket and the cable

from the fan as shown. You can now proceed with the

electrical wiring of your fan. (Figure 3)

Ceiling Bracket

Assembly

NOTE: Supply wires

omitted for clarity

NOTE: Supply wires

omitted for clarity

Wire Tray

Assembly

Wire Tray

Assembly

Figure 4

NOTE: Supply wires

omitted for clarity

Ceiling Support

Cable

Safety Cable

4. Attach the safety cable to ceiling support cable. Slide

cable clamp onto safety cable (from fan). Place the end of

cable through the loop of ceiling support cable. Pull as

much cable through loop as possible. Feed end of

cable into clamp hole and firmly tighten screw (Figure 4).

Cut off excess safety cable.