Installation Guide

Installing the Canopy Housing

NOTE: This step is applicable after the necessary wiring

is completed.

WARNING

To avoid possible fire or shock, make sure that the

electrical wires are completely inside the canopy housing

and not pinched between the housing and the ceiling.

2. Securely attach and tighten the canopy screw cover

gnizilitu tekcarbregnahehtniswercsredluohsehtrevo

the keyslot twist-lock feature. (Figure 2)

Figure 1

Figure 2

1. Remove the two shoulder screws in the hanger

bracket. Align holes in the canopy with holes in the

hanger bracket and securely attach canopy using the two

shoulder screws from the hanger bracket. (Figure 1)

How to Wire Your Ceiling Fan (continued)

Figure 6

5. If your receiver slid out of the bracket at all while

wiring your fan, slide it all the way into the hanger

bracket, taking care not to pinch the wires. The

canopy comes up to cover the receiver and hanger

bracket. (Figure 6)