Owner's Manual

How to Operate Your Ceiling Fan (continued)
How to Install Your Remote Control
Figure 1
1. Installing Wall Holder: (Figure 1)
Attach wall holder using the two provided screws.
13
Maintenance
How to Clean Your Ceiling Fan Blades
1. ylnoehtsinafgniliecwenruoyfogninaelccidoireP
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth
.hsinif ehtgnihctarcsdiovaot
Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish.
Periodic light dusting of the blades is recommended.
A feather duster will work best.
Avoid using water, cleansers, or harsh rags, which can
warp and ruin the blades.
CAUTION
Do not use solvents when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
Reversing
Switch
Figure 6
Season
Summer
Winter
Rotation Direction Switch Position
Clockwise
Counterclockwise
Reverse Switch Information
Right
Left
6. If airflow is desired in the opposite direction, turn
the fan off and wait for the blades to stop turning.
Remove the glass or steel cap then slide the
reverse switch of on the light kit assembly to the
opposite position and turn fan on again. You might
need to use the screwdriver or pin tool slide the
reverse switch. Assemble the glsss or steel cap to the
light plate assembly by twisting in a clockwise direction.
(Figure 6 )
Light Kit
Assembly