Owner Manual

How to Assemble Your Ceiling Fan Blades

1. Remove the two set screws and locking nuts in the

downrod support of the motor assembly and retain

for reinstallation in Step 4 of Page 8. Disassemble the

upper housing cover by removing the six screws at the

top of the motor assembly and retain for Step 3.

Carefully twist and lift off the cover. (Figure 1)

To reduce the risk of personal injury, do not bend the

NOTE: Periodically check blade hardware and

resecure if necessary.

Slide blades through slots in motor housing and att

to the motor hub using the #8-32 serrated head screws

and flat washers. Make sure the screws securing the

blades to the motor hub are tight and are properly seated.

(

Figure 2)

blade when installing, balancing the blades or

cleaning the fan. Do not insert foreign objects in

between the rotating blades.

WARNING

HARDWARE USED:

x 15

FLAT WASHER

SERREATED HEAD

SCREWS

#8-32

Upper Housing

Cover

3. Reassemble the upper housing cover to the motor

assembly using the previously removed screws.

(Figure 3)

Upper Housing

Cover

Motor Assembly

Figure 3

Figure 1

Figure 2

#8-32 Washer Head Screw

with Flat Washer

(3 per assembly)

Motor Assembly

Blade