Specification Sheet

INSTALLATION REQUIREMENTS:
Ceiling fan attaches to electrical junction box securely anchored
and capable of withstanding a load of at least 35 lbs.
ELECTRICAL REQUIREMENTS:
Ceiling fan requires a grounded electrical supply line of 120 volts
AC, 60 Hz, 15 amp circuit.
MOTOR SPECS:
153 x 18 AC motor is designed for optimal performance
with this fan.
BLADE SETS OPTIONS:
A set of three 20˝ and 24˝ all weather composite blades
—sold separately
LOCATION USE:
Fan is rated for dry, damp and wet locations.
CONTROL OPTIONS:
MA4660SSBNW
Stainless Steel
Ceiling Fan
Zonix Wet Custom
™
TR500 hand-held remote control is included. Push button remote control with variable fan speeds, infinite light levels,
fan/light timer and off button. Optional CW1, CW1SW, CW2 and CW60WH wall controls, BTCR9 remote control with
receiver unit, CRL4WH, C4, CRL8TS hand held remote controls and BTR9 receiver are available—sold separately.
Instructions are provided with each control.
LIGHTING OPTIONS:
LK4660SSBNW – One 18 watt dimmable LED—sold separately.
DOWNROD OPTIONS:
Airflow / Energy Efficiency Info (120V)
Fan Speed Max RPM CFM CFM / Watts Amps Watts
158 4819 90 0.44 53
107 3310 116 0.37 28
76 2092 165 0.22 13
High
Med
Low
Fan w/4.5˝ downrod
Fan w/12˝ downrod
Fan w/18˝ downrod
Fan w/24˝ downrod
Fan w/36˝ downrod
Fan w/48˝ downrod
Fan w/60˝ downrod
Fan w/72˝ downrod
A
14.55˝
22.05˝
28.05˝
34.05˝
46.05˝
58.05˝
70.05˝
82.05˝
B
13.05˝
20.55˝
26.55˝
32.55˝
44.55˝
56.55˝
68.55˝
80.55˝
Available Finishes
SSBNW Brushed Nickel
Net Hanging Weight: 13.45 lbs
5.75˝ dia
Blade Sweep = 44˝ & 52˝ dia
14° Blade Pitch
B
A
Power
(W
ave
)
Total Air Delivery
(CFM
ave
)
Estimated Yearly
Energy Cost ($)
Ceiling Fan
Efficiency
(CFM/W)
33 3179 9 96
Energy Guide FTC
Measured with BPW4660-44 Blade in 44˝ sweep
Power
(W
ave
)
Total Air Delivery
(CFM
ave
)
Estimated Yearly
Energy Cost ($)
Ceiling Fan
Efficiency
(CFM/W)
35 3524 10 100
Energy Guide FTC
Measured with BPW4660-52 Blade in 52˝ sweep
Fan comes with 1˝ dia. x 4.5˝ long wet-location downrod (DR1SS-4.5SSBNW). Optional wet-location downrods are
available in 12˝, 18˝, 24˝, 36˝, 48˝, 60˝, and 72˝ lengths. A downrod coupler is available for installations requiring a
downrod longer than 72˝. Fan can be mounted on a sloped ceiling up to 27°. Most sloped ceiling installations require a
downrod longer than the standard 18˝ downrod. Optional sloped ceiling ball kits (SCB1-52) are available for slope angles
greater than 27° and up to 42°. Optional close-to-ceiling kit is available. Call technical support for more information.